Ezviz X5S Guia De Inicio Rapido página 7

Setup
Power on
1. Connect NVR with power outlet and turn on the power switch.
Use stable power supply to avoid device exception or even damage.
2. Wait until the Wizard interface appears on the Monitor and set the password (For First Time Access).
It is recommended to set new password for better security.
3. Log into the NVR.
• A dministrator password is the verification code on the lable of the device.
• I f the wizard does not appear, please check the steps above.
(Optional) Shutdown
1. In the operation interface of NVR (Monitor), go to Shutdown by Menu
2. Click Yes.
For device protection, do not power off it when it is still working.
Link to Camera
1. Connect the camera to the PoE port of the NVR.
2. In the homepage, go to Camera by Menu
Restore the camera if it has been connected to other NVR before.
Power Adaptor
Camera, search and add the camera.
3
Power Outlet
Shutdown and click it.