Final Inspection - Bellelli B-FIX STANTART Manual De Instrucciones

EN EN

Final Inspection

WARNING: Do not conduct the final inspection with the child in the seat.
Push the bike for a few meters by hand, making sure that no moving parts touch the seat, no
protruding straps are close to the wheels and brakes and that pedals are still in good condition.
Check that the fastening system is adequately attached to the bicycle frame and the seat is correctly
hooked in the fastening system.
Placing the child in the seat
Press the button of the middle buckle (21) until you hear a click indicating that the sprocket is
unhooked (fig. S). Pull the buckle upwards to take it off.
Place the child in the seat.
Push the straps through the sides of the child's head (fig. T).
Place the middle buckle through the opening (Fig. U). Slide the buckle through the opening until you
hear a click.
Adjust the loops on the straps so that it rests better on the body of the child (fig. V).
Place the feet of the child on the footrests.
Close the straps (26) by attaching them on the pins on the back of the footrests (fig. Z).
Removing the child from the seat
Loosen the straps holding the feet.
Press the button of the middle buckle (20) until you hear a click indicating that the sprocket is
unhooked.
Pull the buckle upwards to take it off.
Pull the straps over the child's head.
MAINTENANCE
Wash the seat regularly with soap and water. Do not use aggressive detergents.
GUARANTEE
The warranty terms can be found on the warranty web page.
RECYCLING
1. PP
2. Iron
3. Iron
4. PA
5. PP
6. POM
7. PA
8. Iron
9. PA
10. Iron
11. PA
12. PA
18