Reset Button; Battery Replacement - Risco RWS332 Guía De Instalación Y Del Usuario

Sounder parameters
The following sounder parameters can be defined from the system receiver:
Parameter
Alarm Volume
Squawk Volume
Exit/Entry Volume
Supervision Time
Pre-alarm
See your system receiver's installation / configuration manual for more
information about defining sounder parameters.

Reset button

Pressing the reset button will reset the indoor sounder (see Figure 6).

Battery Replacement

To replace the sounder batteries:
Note: To avoid a tamper alarm, enter the system receiver to Service Mode.
1. Remove the sounder from the plastic mounting bracket (see Figure 1).
2. Open the battery compartment cover.
3. Remove the battery holder and replace the old batteries with new ones
while observing battery polarity (see Figure 6).
4. Put back the battery holder.
Description
Defines the sound produced during an alarm 0-9
Defines the sound produced during confirm squawk
0-9
Defines the sound produced during exit/entry time 0-
9
Defines the supervision monitoring time 0-255 min.
Defines the pre-alarm trigger On/Off
7