Wind
Timer
Oscillation
CARE AND CLEANING
CAUTION: ALWAYS UNPLUG THE PRODUCT FROM THE ELECTRICAL OUTLET PRIOR TO CLEANING IT.
1.
Do not use the product in oily or dirty areas, as the air vents may become blocked.
2.
Clean the plastic parts with a mild soap and a damp cloth or sponge.
3.
Never immerse the appliance in water (danger of short-circuit). To clean the appliance, only wipe it down
with a damp cloth and then dry it carefully. Always take out the mains plug first.
4.
Periodically check the screws on the product to ensure they are securely tightened.
5.
Store the product in a cool, dry place.
TECHNICAL DATA
Operating voltage: 220-240V ~ 50/60Hz
Power consumption: 40W
Eco design requirements
Product information requirements
Maximum fan flow rate (F)
Fan power input (P)
Service value (SV)
Measurement standard for service value
Standby power consumption (PSB)
Fan sound power level (LWA)
Maximum air velocity (c)
Contact details for obtaining more information
Recycling
This marking indicates that this product should not be disposed with other household wastes
throughout the 2012/19-EU. To prevent possible harm to the environment or human health from
uncontrolled waste disposal, recycle it responsibly to promote the sustainable reuse of material
resources. To return your used device, please use the return and collection systems or contact the
retailer where the product was purchased. They can take this product for environmental safe recycling.
On-orange
Off-light off
2 hours-red
4 hours-orange
8hours-green
Disable-light off
180 degree-Green
120 degree-Orange
60 degree-Red
Disable-Light Off
20.09 m³ /min
34.8 W
0.58 (m³ /min)/W
IEC 60879: 1986 (corr.1992)
0.248W
58.9 dB(A)
2.10 meter/sec
BAHAG AG
Gutenbergstr. 21
68167 Mannheim
Germany
To set normal wind or
natural wind mode
To set the timer level: 2/4/8
hours
To set oscillation angle or
stop oscillation