Maintenance And Cleaning - oneConcept 10030788 Manual Del Usario

• Please pull the plug out of the socket (do not touch the socket when your hands are wet)
and put in at the correct position.
• After discharging the water in the tub, Please turn the switch from discharge to standard.
• Clean the de-hair device:
• Take out the de-hair set, dismantle it with a fi nger pressing the inside bottom.
• Put the de-hair set in water to clean.
• After cleaning, restore the de-hair device, insert it into the salt under the water level side
board. A click should be heard.
• Pick up the water introducing tube and hang the discharging tube.
• Clean the housing of the machine, wipe it thoroughly, and wipe out the dirt with chemi-
cals, such as alcohol, eradicator, acetone, gas, etc. When it is very dirty, please use neu-
tral liquid soap to clean.
• Close the lid, place the machine at ventilation in the room.
Water is not allowed to enter the inner part of the machine directly. Otherwise, the
electric motor will be conducted by electricity. This is the reason that electric shock
may happen.
Warning: Danger of electric shock
Do not immerse the motor, the power cable or the power plug into water.
12

Maintenance and Cleaning