Maintaining Your Vacuum; Checking For Blockages; Emptying The Dust Cup; Cleaning The Filters - Shark Rocket HV290 Serie Instrucciones

MAINTAINING YOUR VACUUM

IMPORTANT: Clean the dust screen
inside the dust cup as required.
NOTE: Empty dust cup when debris
reaches the MAX fill line.
9
s h a r kc l e a n . c o m

CHECKING FOR BLOCKAGES:

Check all dust cup intake openings.

EMPTYING THE DUST CUP

1 Position the handheld vacuum so the
dust cup is over a trash bin and press
the "Empty" button on the front. The
bottom lid will open, allowing the
debris to fall out.
2 Once dust cup is empty, close the
bottom lid.
RECOMMENDED FILTER CLEANING
SCHEDULE:
Pre-Motor Filter Kit
(Foam & Felt)
XFFV300
Clean once a month.
Post-Motor Filter
XFFV300
Clean once a year.

CLEANING THE FILTERS

1 Pre-Motor (foam and felt):
Lift the latch on the top of the
handheld vacuum to open the filter
cover. Take out filters and tap loose
dirt off them. If more cleaning is
needed, rinse filters with water only
and let them air-dry completely.
To reinstall them, insert the felt
filter first, place the foam filter on
top of it, and close the filter cover.
Foam
Felt
Clean Filter
2 Post-Motor:
Lift off the post-motor filter cover
below the handle. Remove the filter,
rinse it with water only, and let it
air-dry completely. Replace the
filter, then close the cover, pressing
it until it clicks into place.
Felt
s h a r kc l e a n . c o m
10