"On/Off" Switch; " Mode" Selection; Temperature Setting - Fimar EASYLINE PFD20 Uso Y Mantenimiento

Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 22
OPERATING INSTRUCTION
Note:
After pressing ON/OFF button, the induction cooker will shut off automatically if there is no any operation
within 2 hours.
A. "ON/OFF" switch
Connect power plug. A "beep" sound is heard. All indicator light will be flash once, which represent the induction
cooker is under "standby mode". Press the "ON/OFF" button, the induction cooker start working. After cooking,
press "ON/OFF" button to switch off the appliance. Unplug the appliance when the fan is stopped.
B. " MODE" selection
Press the "MODE" button to select the function:
1. Power Setting:
lights up. Then press " MODE" button, the induction cooker start to work, the display shows "1200W". Press
and
to adjust the power (Total of 8 power levels for choice).
Power
500W
800W

2. Temperature Setting:

"180", that means the temperature is 180∘C. Press
choice).
60〬C
Temperature
220〬C
3. Timer Setting:
the display shows "0". Press
adjustable time is 180 mins.
C. " LOCK/UNLOCK" setting
Press "LOCK/UNLOCK " button to lock all settings at " Heating" mode or "Timer" mode. The indicator lights up.
Under "LOCK" status, induction cooker would not respond to any function except the "ON/OFF " button. To
unlock the appliance by pressing the " LOCK/UNLOCK " button for 3 seconds.
SAFETY PROTECTIONS
A.
Overheat Protection:
If the induction cooker is overheated, it will switch to "Sleeping Mode" automatically and stop cooking by showing an
"Error code" (see the below table).
B.
Dry-Boil Protection:
If the stove-top panel is overheat or dry boil, the induction cooker will switch to "Sleeping Mode" automatically
Place the pans in the centre of stove-top. Press "ON/OFF
1,000W
1,200W
1,400W
Press the " MODE" button, Temperature indicator lights up and the display shows
80〬C
100〬C
120〬C
240〬C
Press the "TIMER" button when the appliance is operating, Timer indicator lights up and
and
to adjust the timer. Increase 5 min by each press. The maximum
1,600W
1,800W,
and
to adjust the temperuature ( From 60∘C-240∘C for
140〬C
160〬C
180〬C
3
" button, the power indicator
2,000W
200〬C
Tabla de contenido
loading

Tabla de contenido