Tabla de contenido
STEP 5
Attach the synchronizer bar to
the rear frame arms by tilting
the bar at an angle and sliding
it down the main body from
front to back as shown in figure
6. Secure bar in place by using
qty (4) M5x12 flat head screws as
shown in figure 7.
#2
#2
STEP 6
OPEN
Grab the handle and pull
straight out.
As the shelf system comes out of
the cabinet, continue to pull out
and down until the shelf system
is locked in the down position.
CLOSE
Grab the handle and pull down
to release the lock.
The unit should return inside the
cabinet on its own power.
If it is heavily loaded, you may
need to assist with the return by
lifting the handle.
4
FIG.
6
Operation
Customer Service: 800-626-1126 | rev-a-shelf.com
FIG.
7
#7 M5x12 Flat Head Machine Screws
12400 Earl Jones Way
Louisville, KY 40299
rev-a-shelf.com
Customer Service: 800-626-1126
Tabla de contenido
