Spectroline uVision Serie Manual De Instrucciones página 3

DISASSEMBLING THE FILTER PROTECTOR FOR MAINTENACE
The outer rubber filter protector may be removed periodically to clean the Clear Borofloat
Filter. To disassemble the filter protector, first remove the front rubber cover/filter holder
(129301). Peel the rubber cover/filter holder toward the front portion of the lamp.
The Clear Borofloat Filter will remain inside the protector. To remove the Clear Borofloat
Filter (130089), peel around the edge of the rubber cover/filter holder and push the filter out.
To replace or reinsert the Clear Borofloat Filter into the rubber cover/filter holder, slide the
Clear Borofloat Filter into the channel of the rubber cover/filter holder. Manipulate the rubber
cover around the filter. Assure the filter is evenly seated.
REPLACING THE UV LENSES
The UV-A lenses (UL-110) covering the three UV-A LEDs must be replaced over time. They
will solarize (become cloudy and yellow) from repeated use. To replace solarized lenses,
remove screws from faceplate. Separate faceplate and gasket from lenses. Replace with
new UV-A lenses (UL-110), ensuring they are centered in front of the three (3) UV LEDs on
board. Re-attach gasket, faceplate, and screws.
See Replacement Parts section for part numbers and contact Customer Service for more
details.
Faceplate Gasket
UV-A Lens
UV LED
MEASURING LAMP INTENSITY
To ensure that your uVision™ series lamp is operating at the required UV intensity, it should
be checked periodically. Spectro-UV offers a variety of sensors and meters. The AccuPRO™
XP-2000 combines the functionality of a UV and visible light radiometer/photometer, and is
specially designed to measure UV irradiance with wavelengths of 320–400nm (with peak
at 365nm) and visible light from 460–675nm (with peak at 555nm). Other suitable meters
include the AccuMAX™ XRP-3000 radiometer/photometer kit, using dual-wavelength
UV-A and VIS sensor detectors to accurately measure the irradiance of a light source. The
AccuMAX™ XR-1000 digital readout unit with the XS-365 UV sensor or the DM-365XA
digital readout unit can also be used for UV-A measurement. For more information about
these units, please contact the Customer Service Department at Spectro-UV. Call toll-free
1-866-230-7305.
3