Tabla de contenido
POOL FILLING AND NOTICE
1.
The pool must be filled with clean water.
2.
Chlorine must be always poured into the
skimmer with the pump switched on in
order to avoid that parts of solide chlorine
get in contact with the sidewalls or with
the bottom of the pool.
The contact between chlorine and the liner
will cause a fading of the liner colour, but
it will not weaken the structure.
So you have to pay attention while pouring
the chemicals into the skimmer.
Choline vapour are dangerous, be carefull
and avoid to breath them!
3.
When you intend to shut the filtration system off for a long period we recommend to remo-
ve any undissolved residue of chlorine from the skimmer.
While dissolving slowly, chlorine would fall over to the bottom of the skimmer with the
above-mentioned effects.
4.
Your Laghetto pool liner is made in one piece of a PVC coated polyester membrane with
mold and antifungal treatment. This high quality membrane has been developed for more
than 40 year and don't require any particular maintenance.
At the first filling with water, during the first weeks, it might happen to notice some
sweating on the surface of the liner.
This is a normal characteristic and doesn't effect the strenght and the durability of the
liner and is not intended as a defect. Let the wet spots dry naturally, dont wipe them.
This phenomenon will disappear in few days.
* The mold treatment is for the most common Swimming Pool Molds. Special conditions may develop different mold
immune to these treatments. This doesn't effect the strenght and the durability of the liner and is not intended as a
defect. This is not a valid reason for warranty replacement.
5.
NOTE: USE OF SALTWATER CHLORINATOR SYSTEMS ON DOLCEVITA
With the use of salt systems in Dolcevita pools, we require the assembly of a too-full
device.
88
Tabla de contenido
