logitrans LT 1001 Manual De Instrucciones página 6

Battery and charger
Charging
Please be aware that the mains voltage corresponds the mains voltage, indicated
on the charger.
Built-in charger (12V and 24V):
1. Connect the charger to the mains.
2a. 12V charger: The charging diode flashes during charging. Charging is
continued until the charging diode is on constantly. A fully charge normally takes
8 hours.
2b. 24V charger: The diode of the charger is placed next to the battery hour meter.
When the charging starts, the green diode flashes.
When the battery is fully charged, the green diode is alight.
Please note! When connected to the mains, the driving functions of the truck
are disconnected (truck with propulsion).
3. If the charger stays connected, the charging process will end after finished
charging, and the charger will change to equalising charge.
If the battery has not been fully charged after 18 hours of constant charging, the
charger is switched off automatically.
6