Specific Safety Rules - M7 DW401A Manual De Instrucciones

SPECIFIC SAFETY RULES FOR
IMPACT WRENCH
1. Hold power tool by insulated gripping
surfaces, when performing an operation
where the fasterner may contact hidden
wiring or its own cord. Fasterner
contacting a "live" wire may make
exposed metal parts of the power tool "live"
and could give the operator an electric
shock.
2. Use only with the chargers and
batteries listed below:
Battery pack
DB-1850
3. Always wear safety goggles and ear
protection when using this tool.
4. Ensure the switch is in the off position
before inserting battery pack. Inserting the
battery pack into power tools that have the
switch on invites accidents.
5. Check the impact socket carefully for
wear, cracks or damage before installation.
6. Bit, sockets and tools get hot during
operation. Wear gloves when touching
them after use.
7. Remove the
changing accessories. Accidental starting
may occur, because battery appliances
with a battery inserted are in the operative
condition.

SPECIFIC SAFETY RULES

Charger
DC-18A
battery pack before
WARNING:
power sanding, sawing, grinding, drilling
and other construction activities contains
chemicals known to cause cancer, birth
defects or other reproductive harm. Some
examples of these chemicals are:
• Lead from lead-based paints
• Crystalline silica from bricks and cement
and other masonry products, and
• Arsenic and chromium from chemically-
treated lumber.
Your risk from these exposures varies,
depending on how often you do this type
of work. To reduce your exposure to these
chemicals: work in a well ventilated area,
and work with approved safety equipment,
such as those dust masks that are specially
designed to filter out microscopic particles.
Some dust created by
Page 6
5 5