AD Instruments AD511 Manual De Usuario página 21

©Copyright Abacanto Digital SA.
_______________________________________________________________________________
COMP
TIME
TEST
Ho
Lo
DVC/ACV
Manual de usuario AD511
decrease 30.
When the Meter is under compare mode:
z
S1 means increment of 1, then each press of
¾
decrease 1.
S2 means increment of 10, then each press of
¾
decrease 10.
S3 means increment of 100, then each press of
¾
or decrease 100.
Set a pass / fail limit for insulation tests. The default value is 100M:
Pres to step through continuous measurement, timed measurement and
polarization index measurement in sequence.
Press to stop or start an insulation resistance test
Press to initiate insulation resistance measurement
Press to initiate low resistance measurement
Pres to initiate voltages measurement
AD Instruments
increase 1 or
increase 10 or
increase 100
21