Tabla de contenido
Idiomas disponibles
Idiomas disponibles
If you are replacing a deskside version, see
packing the library. See
If the library is in a rack, continue to the next step.
You must remove the door and two decorative covers to access the holes in the frame.
30. Hold the door firmly with your left hand, and remove the two hinge pins.
Note: Remove the bottom pin first, to make it easier to balance the door while holding it.
1
31. Set the door aside.
32. Remove the top right decorative cover over the operator panel by grasping the top of the cover and
gently pulling it away from the operator panel. The snap pins will disconnect from the holes in the
frame.
33. Remove the center decorative cover the same way.
Note: Do not remove the bottom section, which is the CAP.
1
96051
Figure 1-1 on page 1-11
Chapter 2
for instructions about returning the library.
L201_303
201_307
Sixth Edition
Removing the Existing Library
and its callout list to continue
1. Hinge pin (2)
1. Snap pins (6)
1-9
Tabla de contenido
