Decolav 9297 Serie Manual De Instrucciones

Product Description – Roughing-in Dimensions
Installation Notes
•
Install Lavatory according to manufacturer's provided installation instructions.
•
Remove Drain Nut, Hard Washer and Thick Washer from Drain.
•
Insert Drain into drain hole of Lavatory as shown.
•
NOTE: USE OF A NON-CORROSIVE SILICONE SEALANT UNDER
THE FLANGE OF THE DRAIN IS SUGGESTED.
•
Apply Teflon to the exposed male threading of Drain.
•
Place Thick Washer then Hard Washer over the exposed male
threading of Drain.
•
Thread Drain Nut onto Drain.
•
NOTE: DO NOT OVERTIGHTEN DRAIN!
•
If needed, trim off excess Tailpiece for appropriate length.
•
Apply Teflon to exposed male threading of Tailpiece and tighten.
•
Install waste system.
•
Check for leakage.
Push Button Closing Umbrella Drain with Overflow
• Parts and Accessories
• With Overflow
• 1 1/4" (3.175cm) Internal Diameter
• Measurement: 2 3/4" x 8 3/4" (6.985cm x 22.225cm)
(including tailpiece)
• CSA Certified: CSA B125-01, ASME A112.18.2 - 2002
Model Number: 9297 Series
Customer Service
561-274-2110
www.decolav.com
2 3/4" [6.985cm]
Overflow
O.D. 1 5/8"[4.1275cm] x 11TH
1 1/4" [3.175cm]
Lavatory
Thick Washer
Hard Washer
Tailpiece
Thread
Drain
Countertop
Drain Nut