Cleaning And Maintenance; Eu Declaration Of Conformity - HSM Powerline HDS 150 Manual De Instrucciones

english
8 Cleaning and maintenance
WARNING
Dangerous mains voltage!
Improper handling of the machine can lead
to an electric shock.
Switch off the machine before relo-
cating, cleaning or maintenance
and disconnect the mains plug.
• Clean the machine only with a soft cloth
and a mild soap-water solution. However,
no water must enter the equipment.
Never use scouring agents, cleaning fluid,
petroleum or thinners.
Service work may only be carried out by the
HSM Customer Service or by the service tech-
nicians of our contractual partners.
Greasing the synchronous wheels
(quarterly)
1
• Remove the rear panel (1).
26
• Grease the synchroniser wheels (2).
Recommended lubrication: K2K to
DIN 51502/DIN 51825
• Put the rear panel back on.
9 Disposal/Recycling
Dispose of the machine in an environmen-
tally sound way at the end of its service life.
Observe the current regulations when doing this.
As legislation is subject to ongoing changes,
we request that you contact your local authori-
ties at the appropriate time. As the manufacturer,
HSM would be glad to advise you on the dis-
posal of your old machine.
EU Declaration of Conformity
The manufacturer HSM GmbH + Co. KG, Austraße 1-9,
88699 Frickingen / Germany, hereby declares that the
HSM HDS 150 hard drive shredder meets the fundamental health and safety requirements of the following EU directives
on the basis of its design and construction in the version
marketed by us:
Machinery directive 2006 / 42 / EC
EMC directive 2004 / 108 / EU
Related standards:
EN 349, EN ISO 14120, EN 1037, EN 1088, EN ISO
12100, EN 13849-1, EN ISO 13850, EN ISO 13857, EN
60204-1, EN 61000-3-2, EN 61000-3-3, EN 61000-6-2,
EN 61000-6-4, EN 62061
Authorised representative for the compilation
of technical documentation:
Hubert Kötzinger, HSM GmbH + Co. KG
Frickingen, 15.1.2018
HSM Powerline HDS 150
2
p.p. Hubert Kötzinger
Chief Technical Officer (CTO)
01/2018