Millipore NovaSeal NM0029 Manual Del Usuario página 20

20
3. Close the jaws by slowly releasing them. Holding the crimper with both hands,
press and hold the trigger for ten seconds. If the LED illuminates, refer to the
Troubleshooting section in this guide.
4. Release the trigger.
5. Open the jaws by squeezing the jaws closest to the handle. Verify that the
tubing pinch pipe has been cut competely. Remove the tubing from the tool by
pulling the tubing straight out.
The crimped edge may be sharp.
10
sec
www.millipore.com