Skoda 5E0 092 155 Instrucciones De Montaje página 16

Advice. In next potential disassembly and assembly of the towing
coupling, the clamp screws have to be replaced with new ones.
- 7, 8 -
- Test the fitting of the towing arm (C) into the clamp bushing of the towing coupling beam.
EN
Use the key (D) to lock the arm in position, and unlock it again.
- Then fit the arm from the clamp bushing and place a cap (E) on the ball journal. Place the
towing arm to the respective place in the tool kit in the car trunk.
- Fit the cover (F) upon the clamp bushing of the towing coupling.
Proceed to the fitting of the electric installation of the towing coupling upon the vehicle
(see the instructions for fitting the electric installation of the towing coupling).
Having finished the fitting of the electric installation, re-fit all removed parts to their places
and tighten the respective connections at the prescribed torque moments.
Inform the customer about these provisions.
After having driven the first 500 km approximately, have the tightening of the screws
clamping the beam to the chassis of the vehicle checked and, if necessary, tighten them
to the prescribed torque of 90 Nm! We recommend you to have this check done at the
nearest authorized service shop.
See the instructions for operation and maintenance of the towing coupling on the Service
Manual of the vehicle - chapter Towing Coupling.
Guarantee information and conditions
The towing coupling manufacturer provides the guarantee for the construction, used mate-
rial, manufacturing execution and function of the supplied towing coupling for 24 months
from the date of the sale.
It is a condition of validity of the warranty that the towing coupling has been used for those
purposes only for which it is devised.
All towing coupling parts and accessories must be checked before professional fitting with
regard to their compatibility with the respective type of vehicle. The towing couplings may be
used only for the vehicle type stated by the manufacturer. In case of inexpert fitting, or if the
towing coupling has been fitted to a type of vehicle it is not designed for, the manufacturer
shall not be held liable for possible damage to the towing coupling caused by its faulty fitting
or improper use.
The warranty does not cover any damages due to common wear, to overloading and
inexpert use of the towing coupling, as well as if it has not been used in compliance with
the instructions given in the Operating Manual. Furthermore, the warranty does not cover
damages occurred due to natural disasters. The selling organization is neither responsible for
any damage in case the towing coupling was modified or otherwise altered.
16