Cleaning The Ceramic Hob - ROSIERES RVM 324 Instrucciones De Empleo E Instalación

Encimeras vitrocerámicas
Tabla de contenido
Idiomas disponibles

Idiomas disponibles

____________________________________________________________________________

CLEANING THE CERAMIC HOB

• It is important to wait for the ceramic hob surface to cool completely before cleaning
it.
• Only use special products for cleaning ceramic surfaces, cream and scraper. You
can find them easily in the shops.
• Avoid spills; messes that fall onto the cooking surface burn fast and are then harder
to clean off.
• It is recommended to keep away from the cooking surface anything likely to melt
like plastic articles, sugar or products with a high sugar content.
CLEANING:
. Sprinkle a few drops of special ceramic surface cleaner.
. Rub, working hard on any stained parts, using slightly damp soft cloth or kitchen roll.
. Wipe with dry soft cloth or kitchen roll until the surface is clean.
If stains remain after this usual cleaning:
. Sprinkle a few more drops of special cleaner.
. Use a scraper, keeping it at an angle of 30° to the hob,
until the difficult marks go.
. Wipe with dry soft cloth or kitchen roll until the surface
is clean.
. Repeat if necessary.
ADVICE:
Regular cleaning leaves an protective layer that is essential to prevent scratches and wear.
Make sure that the surface is clean before using the hob again.
To remove traces of water and scale, use a few drops of white vinegar or lemon juice. Finish
off by wiping with absorbent paper, and then apply a few drops of special cleaner and wipe.
Ceramic glass withstands the rubbing of flat-bottomed cooking utensils, but it is neverthe-
less advisable to lift them before moving them.
On vitroceramic hob with control knobs, for thorough cleaning, the control knobs can be
removed by pulling them upwards. Only clean with soapy water and dry well before placing
them. Be careful not to let any water get into the holes and take care when replaced the
control knobs.
NOTE:
. Avoid using a sponge with too much water.
. Never use a steel tool like a knife or screwdriver.
. A razor blade scraper cannot damage the surface if it is used at an angle of 30°.
. Do not leave the razor blade scraper within the reach of children.
. Do not use abrasive cleaners or scouring powder.
• The hob frame:
To clean your hob's frame without harm, wash it with soap and water, rinse, and then dry with
a soft cloth.
- 41
Tabla de contenido
loading

Tabla de contenido