Tabla de contenido
Idiomas disponibles
Idiomas disponibles
SYMBOLS
Switch the product off and disconnect it from the power supply before assembly,
cleaning, adjustments, maintenance, storage and transportation.
This product is of protection class II. That means it is equipped with enhanced or double
insulation.
The product complies with the applicable European directives and an evaluation method
of conformity for these directives was done.
WEEE symbol. Waste electrical products should not be disposed of with household
waste. Please recycle where facilities exist. Check with your Local Authority or local store
for recycling advice.
GENERAL
•
Only use this tool for dry polishing.
•
Only use the ranges which are supplied with this tool.
•
This tool should not be used by people under the age of 16 years.
•
Always disconnect plug from power source before making any adjustment or changing any
accessory.
•
Do not work materials containing asbestos (asbestos is considered carcinogenic)
ACCESSORIES
•
Use only accessories with an allowable speed matching at least the highest no- load speed of the
tool.
•
Never use accessories with a "blind" threaded hole smaller than M14 x 21 mm.
•
Do not use damaged, deformed or vibrating accessories.
OUTDOOR USE
•
When used outdoors, connect the tool via a fault current (FI) circuit breaker with a triggering
current of 30 mA maximum, and only use an extension cord which is intended for outdoor use
and equipped with a splash proof coupling-socket.
BEFORE USE
•
Always check that the supply voltage is the same as the voltage indicated on the nameplate of
the tool (tools with a rating of 230V or 240V can also be connected to a 220V supply).
•
Dust from material such as paint containing lead, some wood species, minerals and metal may
be harmful (contact with or inhalation of the dust may cause allergy reactions and/or respiratory
diseases to the operator or bystanders); wear a dust mask and work with a dust extraction device
when connectable.
•
Certain kinds of dust are classified as carcinogenic (such as oak and beech dust) especially in
conjunction with additives for wood conditioning; wear a dust mask and work with a dust
extraction device when connectable.
•
Follow the dust-related national requirements for the materials you want to work with
•
Secure the workpiece (a workpiece clamped with clamping devices or in a vice is held more
securely than by hand).
•
Do not clamp the tool in a vice.
•
Use completely unrolled and safe extension cords with a capacity of 10 Amps.
BGS technic KG
Bandwirkerstr. 3
D-42929 Wermelskirchen
Tel.: 02196 720480
Fax.: 02196 7204820
www.bgstechnic.com
© BGS technic KG, Copying and further use not allowed
Tabla de contenido
