Menu Settings; Usb Mode; Product Specifications - unotec CAMCAR DUAL 2 Manual Del Usuario

Menu settings

Press the "Menu" button to enter the menu mode settings in which
(video, photo or playback) are. Press UP and DOWN keys to navigate
through the available options. Press the "OK" button to access the
options for each setting.
Press briefly in "MENU" or "MODE" to exit the Settings menu.
Time settings
Short press "MENU" to enter "Settings menu". Press up or down to
select the setting date / time, press "OK" to enter. A short press "OK"
will change between a / m / d / h / m / s.
Press the Up and Down buttons to adjust the figures date and time,
then press "OK" to confirm the change.

usb MoDe

Connect the USB cable to the camera and press the power button. The
Camcar display the USB menu.
Charging Instructions
The red indicator lights during charging. The full charge time is about
180 minutes. The red indicator light turns off automatically when the
Camcar is fully charged.
There are three options to charge the Camcar.
1. Power adapter.
2. USB.
3. Charge through the car ligher.
Notice: Camcar connections can only use 5V car, do not use other
connections or you may cause damage to the device. Use the power
adapter 12V / 24V.

proDuct specifications

G-sensor built.
Screen 2.4 "TFT
120 ° ultra wide-angle lens.
Video files. AVI
Resolution: 1080P max.
Video Loop: Yes
Auto On / Off: Yes When connected to power the car.
Motion detection: Yes.
Park assistant.
Micro SD memory up to 32GB.
8 megapixels Photo Mode
8 english