Factor FES-101B Manual Del Usuario página 4

www.factorelectronics.com
A. Getting Started:
Step1: Plug your equipment into the Power Saver. Route the AC cables through the
cable management opening at the top of the unit. Keep the AC cables neatly bundled
with a tie wrap.
Step2: Connect the Power Saver AC power cord to an AC outlet and turn the master
power switch to ON. All AC outlets will be powered.
B. Timer settings Quick Start Guide:
The Power Saver is equipped with a digital clock and a 7-day programmable timer.
Connected equipment can be automatically turned ON/OFF up to 4 times per day.
Outlet 1 is always ON. When the timer is in OFF mode, outlets 2-8 will be OFF.
When the timer is in ON mode, outlets 2-8 will be ON. When the timer is in AUTO
mode, outlets 2-8 will be controlled by the timer.
Sounds complicated?
Not at all! The Power Saver is equipped with easy-to-use presets. Choose a preset
that suits your schedule or custom-override any preset quickly and easily.
For additional power saving features, refer to the section on "Control –timer-con-
trolled outlet" and "Sensor –timer-controlled outlet".
Step1: Set main power switch
Position the MAIN POWER SWITCH to either ON/AUTO/OFF.
• ON = All outlets 1-8 will be on.
• OFF = Outlets 2-8 will be off. Note: Outlet 1 is always on.
English pg.03
Electronics User's Manual