Troubleshooting Guide - IKEA RODULF Manual De Instrucciones

Technical data
Model name
Type number
Input
Standby power consumption
Temperature interval at usage
Temperature interval at storage
Operating humidity
Sound level
Height setting interval
Maximum load
Trouble shooting guide
NOTE!
Do always disconnect the cable from the wall socket before maintenance!
Symptom
The desk does not move.
Only one column is moving.
The columns are moving at
different speeds.
The desk only moves short
distances.
The desk stops and reverse
during operation.
The desk is not able to drive all
the way up or all the way down.
The desk can only drive in one
direction (up or down).
The desk is not horizontal.
RODULF si/st desk 140x80
RODULF-GF-470
100–240 V AC, 50–60 Hz, 3.2–1.5 A
<0.1 W
50–104 °F or 10–40 °C.
0–158 °F or -18–70 °C
20–90 % RH at 40 °C
<50 dB(A)
68–115 cm or 26.8–45.3 inches
80 kg or 176 lb
Check
Make sure that all cable are
connected.
Unplug the desk from the wall
socket for roughly 1 minute and
reconnect.
It is possible to move the slower
column by pulling/pushing.
It is not possible to move the
slower column by pulling/
pushing.
Make sure that the desk is not
overloaded.
Make sure that nothing is
blocking the desk movement.
Try
Connect the cables.
Follow installation instructions
and perform a reset.
Perform a reset. If there's still
only one column moving, replace
the column that is not moving.
Replace the column that is
moving slower.
Replace the column that is
moving faster.
Unload the desk. If the problem
remains, replace the control box.
Remove the obstacle. If the
problem remains replace the
whole underframe.
Check all connections.
Perform a reset.
6