oneConcept 10032036 Manual Del Usuario página 13

EN
Spray the detergent or water evenly over the
surface to be cleaned by pressing the spray
trigger(8) from the bottle.
Loosen the dirt by rubbling the surface with the
towel 10 which set into the cloth holder(9).
First,press the On/Off button (4) to start the
cleaner. Next,press and hold the wiper against
the surface you are cleaning,and move the
Window Cleaner vertically from the top to the
bottom. This will vacuum up the liquid and in
turn,clean the surface.
NOTE: Never use the cleaner upside down as this
will cause leakage and damage to the product. It
is dangerous to use the product upside down.
After use,press the On/Off button(4)to turn off
the cleaner. When the battery charge is gettling
low,the charge/operations LED will begin to blink
slowly.This is indicator that it is time to charge the
cleaner.If the cleaner is not charged,then it will
stop working in time.Please ensure to switch the
cleaner off after each use.This will increase your
operaing time per battery charge. Do not turn on
the cleaner when it is charging.
If the water tank reaches its maximum capacity,
take away the water tank cap (1 1). Empty the
tank.
13