Festo CPX-4AE-P Manual Del Usuario página 12

Removing:
1. Mark all pneumatic tubing.
2. Press the locking ring of the QS connector, e.g. using
3. Remove the tubing from the QS connector.
4. Close all connections not needed with blanking
3.2 Operation
Caution
Extreme pneumatic conditions (rapid pressure change
with large pressure amplitudes) can damage the pres
sure sensors of the module.
Example:
Pressure changes at one second intervals with pressure
amplitudes of 10 bar result in a temperature increase of
50 K.
The settings for the pressure sensor module are made by
parameterisation (see the CPX analogue IO modules
manual).
12
a screwdriver or the QSO releasing tool from Festo.
plugs (type QSC−4H, part number 153267)
Festo CPX−4AE−P 0906NH English