Tabla de contenido
GB
1.0 - Items supplied
(Subject to technical changes)
The control unit consists of the following components as supplied:
1. Control unit with operation panel and integrated load unit
2. Sensor with heater sensor and thermal fuse
3. Sensor with temperature sensor / humidity sensor
4. 2 sensor cases
5. 1 silicone sensor cable, 3/4-stranded, with an approx. length of 5 meters
6. Assembly bag (three 4 x 40 mm screws and four 3 x 30 mm screws)
2.0 - Technical data
Housing dimensions
Operation
Display 4
Protection
Rated voltage
Switching power in Finnish mode
Switching power in humidity mode
Control range for Finnish mode
Control range for bio mode
Heater sensor limit
Temperature limit
Temperature indicator
Humidity control
Heat cycle limit
Lighting
Ambient temperatures
Ou tdoors
3.0 - Explanation of symbols
Information!
This provides the user with useful information and tips about how to operate and use the
sauna system (sauna cabin, sauna heater and sauna controller)!
Warning!
Danger!
Warnings about possible dangers or dangerous situations which could even lead to loss of
life!
Caution!
Instructions or warnings which could lead to defects or damage to components if not ob-
served.
Electrical voltage!
Warns about voltage and high voltage! Failure to observe this warning may result in an elec-
tric shock.
22
Width 235 mm - height 195 mm - Depth 75 mm
Touchpad – touch control
sections of 15 mm x 30 mm each
IPX4
400 V ~ 3 N PE
Maximum 10.8 kW ohmic load (AC1 operation)
Maximum 9.3 kW plus 1.5 kW for the bio evaporator unit
5° to 100° Celsius - 5° adjustment
5° to 70° Celsius - 5° adjustment units
125° Celsius (heater sensor no. 1)
140° Celsius (heater sensor no. 1)
Maximum 110° Celsius (RAL point sensor no. 2)
Measurement by humidity sensor – actual measurement
240 minutes or 4 hours
Maximum 60 W – dimmable 10% adjustment units
-15° to plus 40° Celsius
Protective enclosure required (splash proof)
Tabla de contenido
