Glacier bay FP1B4202SS Guía De Instalación Y Cuidado página 6

Installation (continued)
5
Securing the faucet body
□
Loosen the set screw at the bottom of the faucet
□
body (B). Align the set screw hole at the bottom
of the faucet to the recess on the top mounting
fixture (E) and then set the faucet body (B) to the
top mounting fixture (E). Ensure there are no gaps
between the faucet body (B) and the mounting
surface.
□
Tighten the set screw with the hex wrench (G).
B
G
6
Connecting supply lines
CAUTION: Ensure the supply lines do not kink, twist or
bend into a "V" or "L" shape during installation. Do not use
if there are visible signs of damage.
□
Use an adjustable wrenches to connect and
tighten the supply lines to the supply valves.
□
Connect the red supply line to the hot water
supply valve.
□
Connect the blue supply line to the cold water
supply valve.
RED
LINE
B
E
HOT
6
BLUE
LINE
COLD
2