Handling And Use; Malfunction Causes And Remedies - 1 BY ONE 705US-0001 Manual De Instrucciones

Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 10

Handling and use

EN
DE
This section provides you with important information on handling and
using the appliance.
FR
ES
Switching the appliance on/off
JP
Plug the connecting plug into the connection socket on the
appliance.
IT
Plug the power adapter into a mains power socket.
Switch the on/off switch to position "I" to switch the appliance on. The
green "ON" LED lights up.
Switch the on/off switch to the "0" position to switch the appliance off.
The green "ON" LED goes out.
NOTE
The water tank must be completely inserted into the appliance
otherwise the condensate will not be collected correctly.
Emptying the water tank
The appliance is fitted with an "auto-stop function" as soon as the
water tank is filled with around 400 ml (MAX marking). The appliance
then switches off automatically and the red "Full" LED lights up.
Switch the on/off switch to the "0" position to switch the appliance off.
Hold the water tank using the front grip recess and pull it carefully out
of the appliance so that water does not spill out.
Pour out the water by using the spout and push the water tank back
into the appliance.
NOTE
The water tank must be inserted fully into the appliance, otherwise
the appliance cannot be switched on.
Switch the on/off switch to position "I" to switch the appliance on.
The green "ON" LED lights up.
03

Malfunction causes and remedies

The following table will help with localising and remedying minor
malfunctions:
Defect
Possible cause
The power adapter is not
plugged in.
The mains power socket is not
supplying power.
The appliance
Safety stop due to missing or
will not
incorrectly inserted water tank .
switch on.
The water tank is full.
The air intake opening or the
The appliance
air outlet opening is soiled
produces no
or covered.
or very little
Windows and doors in the
condensate.
room are open.
NOTE
If you cannot solve the problem with any of the aforementioned
methods, please contact the Customer Service department.
Cleaning
Never clean the water tank in a dishwasher. Otherwise it can be
damaged.
Clean the water tank regularly every two weeks to avoid mould and
bacteria. To do this, fill the water tank with lukewarm water and add a
commercial detergent. Rinse it out several times with lukewarm water.
Furthermore, we recommend disinfecting after cleaning. To do this,
use a commercial, alcohol-based disinfectant or one containing a high
percentage of alcohol. Both substances are completely harmless if you
rinse out several times with lukewarm water afterwards.
Rectification
Plug the power adapter into the
mains power socket.
Check the house fuse.
Ensure the water tank is
inserted correctly.
Empty the water tank and
reinsert it into the appliance.
Ensure that the air intake and
outlet openings are clean and
free of blockages.
Close the windows and doors.
04
EN
DE
FR
ES
JP
IT
Tabla de contenido
loading

Tabla de contenido