Titan Controls Kronus 4 Guía Sencilla

®
Kronus 4
Temperature, Humidity, CO²,
Day and Night Controller
Easy Guide
VANCOUVER, W ASHINGTON U.S.A.
Instructions for Use
1. Mount Kronus 4 in a secure area, but away
from moisture, sprays, pesticides, etc.
2. Plug CO² Controller (Atlas 1) or CO² Timer (Apollo 1)
into the "CO² Output" outlet.
3. Turn the CO² Controller or CO² Timer "ON".
4. Plug fan into the "Exhaust Fan Output" outlet.
5. Turn exhaust fan 'ON' to the highest setting.
6. Plug dehumidifi er into the "Dehumidifi er Output" outlet.
TM
7. Turn dehumidifi er 'ON' to the highest setting.
8. Plug circulation fan, night light, etc. into the
"Night Only Output"
9. Turn circulation fan, night light, etc. 'ON' to the
appropriate setting.
10. Place remote sensor in grow area at plant canopy height.
11. Set the 'Temperature' and 'Humidity' control
dials at the preferred temperature and humidity
levels for your garden.
12. Plug the Kronus 4 into a 120 Volt/15 Amp outlet.
Note: A surge protection device is recommended.
13. Turn Kronus 4 to the
"ON" position.
14. The Kronus 4 will now activate
and deactivate the equipment
based on your preferred settings.
Controller
Specifi cations
Size: 9.5" H x 8.5" W x 2.5" D
Weight: 3 lbs.
Voltage Input: 120 Volts
Voltage Output: 120 Volts
Maximum Amperage: 15 Amps
Hertz: 60 Hz
Min/Max Humidity Control
Level: 40% RH to 90% RH
(non-condensing)
Humidity Accuracy: +/- 5%
Min/Max Temperature Control Level: 45°
to 95°F (7° - 35°C)
Temperature Accuracy: +/- 2°
Cord set: 6 foot/14 AWG
Storage Temperature: 32° to 120° F (0° - 49°C)
Operating Temperature: 45° to 95° F (7° – 35° C)
www.titancontrols.net
For technical assistance call us at
1-888-80-Titan or 1-888-808-4826.
Controlling a CO² Tank or CO²
Generator, Circulation Fan,
Exhaust Fan, & Dehumidifi er
Exhaust Fan
2
CO
Generator
OR
Atlas 1
CO² Monitor
and Controller
2
CO
Tank
120 Volt
Power in
Kronus
Sensor
®
Kronus 4
Night Light
OR
Circulation Fan
Remote
Sensor
Dehumidifier