Detection; Privacy Mask - Avtech IC-AVH516 Manual De Instrucciones

5.4.3 DETECTION

CONNECTION
CAMERA
DETECTION
ALERT
NETWORK
DISPLAY
RECORD
NOTIFY
PSE
MULTICASTING
EXIT
1) ALARM
Select N.C./ N.O depending on your installation need. The default alarm value is OFF.
2) INTERNAL ALARM
This function appears only when the camera connected supports human detection.
Select "ON" to enable human detection, or "OFF" to disable it.
3) SENSITIVITY
Select the detection sensitivity of the selected channel.
4) MOTION
Select if you want to activate the motion detection function for the selected channel (ON/OFF).
5) AREA
Click "EDIT" to set the motion detection area.
There are 16 × 12 grids per camera for all channels. Pink blocks represent the area that is not being detected
while the transparent blocks are the area under detection.
Note: To exit area setting and return to the detection page, right click your mouse.

6) PRIVACY MASK

You can cover certain areas on the camera image with privacy masks.
Note: Up to 20 areas could be added.
MOSAIC SIZE
NAME FUNCTION
MASK1
MASK2
Select "ADD" to add a new setting, "EDIT" to modify an existing setting, and "DEL" to remove a setting.
ADVANCED CONFIG
CH1 CH2 CH3 CH4
ALARM
INTERNAL ALARM
(For selected models only)
SENSITIVITY
MOTION
AREA
PRIVACY MASK
(For selected camera models only)
PRIVACY MASK
MOSAIC
OFF OFF
ON ON
OFF
ON
ON
EDIT
SETUP
COLOR MOSAIC COLOR
ON
ON
ADD
30
8x8
TRANSPARENCY
0%
25%
EDIT DEL
MAIN MENU