General Information
Introduction
This user manual is for use with ultrasonic cleaning tanks from
RND.
All cleaning tanks should be handled with care to ensure maximum
performance. Please read and understand this user manual before
using your ultrasonic cleaner.
Care and Safety
•
Do not operate if the tank is less than 2/3 full.
•
Ensure power is disconnected before attempting to add or
remove fluid.
•
If pouring fluid away, pour away from the electrical socket
on the rear and front control panel.
•
Do not let items rest on the base of the bath, always use a
glass beaker or basket.
•
Do not place hands or fingers in the bath. Contact exposure
to ultrasonic cavitation is suspected to cause living tissue
and bone damage.
•
Do not use any fluids which could potentially damage the
stainless steel bath e.g acids.
•
Do not use fluids exceeding 80 °C.
•
When submerging parts ensure fluid is not displaced out of
the bath.
•
Maximum running time for a single cycle is 45 minutes.
•
Always allow a rest time of 20 minutes between cleaning
cycles.
•
Never drop an item onto the base of the bath.
2