Tripp-Lite B032-HUA2 Manual Del Propietário página 6

Operation
Keyboard Hotkey Commands
The following table lists the keyboard hotkey commands available for use on
the KVM switch.
Combination
[Scroll Lock]
[Scroll Lock]+
16-11-116-93366A.indb 6
Function
[Enter] Toggles the KVM and Audio focus between the two
ports
Note: If the KVM and Audio focus are on different ports, only
the KVM focus switches
[k] [Enter] Toggles the KVM focus only
[s] [Enter] Toggles the Audio focus only
[a] [Enter] Starts Auto Scan. The KVM focus cycles from port
to port at 5 second intervals
[a] [Enter] [n] Starts Auto Scan. The KVM focus cycles from port
to port at n second intervals
Note: Replace n with a number between 1 and 4
(1 = 3 sec; 2 = 5 sec (default); 3 = 10 sec; 4 = 20 sec)
To exit Auto Scan, press [Esc] or [Spacebar]. Auto
Scanning stops when you exit Auto Scan mode
[x] [Enter] Toggles the hotkey invocation key between
[Scroll Lock] and [Ctrl]
[m] [Enter] Enables/disables mouse emulation function
[n] [Enter] Enables/disables keyboard emulation
[w] [Enter] Enables/disables mouse port-switching function
[F2] [Enter] Activates Mac keyboard mapping
[F10] [Enter] Automatically detects and sets the keyboard
operating platform
[F4] [Enter] Lists current switch settings via the paste function
of a text editor
Note: To perform this hotkey, you must first have a text
editor or word processor (such as Microsoft Word) open, with
the cursor in the page window. Upon performing this hotkey,
the KVM's current settings will be displayed.
[F5] [Enter] Performs a USB keyboard and mouse reset
[F6] [nn] [Enter] Sets the keyboard language layout
Note: nn is a two digit number that represents one of the
following keyboard language codes: US English 33; French
08; Japanese 15
6
12/15/2016 10:43:24 AM