endolite LINX Guía De Usario página 8

Battery Charging
We recommend that the Linx limb should be fully
charged every night. It should take 8 hours to charge
fully. We also recommend battery charging whenever
convenient.
Step by Step Guide:
1. Lay the limb on a flat surface.
2. Switch the Battery On/Off switch to ON.
3. Connect the charger plug to the charging socket on
the posterior part of the knee module.
4. Check the Battery Charger LED is flashing green to
confirm the battery is charging.
5. Refer to table below to ensure Limb is charging.
6. Disconnect from the charger when charged
sufficiently.
7. Switch the Battery On/Off switch OFF, then ON, to
ensure a full reset sequence.
8. Wait for 30 seconds while observing the Linx Limb
LED changing colour as indicated:
Red
Linx Limb
LED
9. If reset sequence is unsuccessful or the LED remains
Red, repeat from step 7.
Battery Charger LED
Yellow
Green > fast flashing
Green > slow flashing
Green
Yellow > fast flashing
NOTE:
If the charger LED is yellow and the Limb is
making a clicking noise check that the Battery
switch is in the ON position.
(continued)
Blue Red
Charging state
standby
Fast charging
Close to full charge
Maintain (trickle charge)
Error (Ensure Battery Switch is ON)
Green Off
6
Battery
Charger
Battery
Charger
LED
Linx
Limb
Linx
Limb
LED
938354/4-0915