Ideal Networks PoE Pro Guía De Uso página 6

TERMINATIONS
The Dual Port Remote Unit can be stored in the bottom end of
the Tester, with the jacks either inside for protection or outside
for testing patch cables without removing it from the Tester,
and provides internal storage for the Coax Remote Unit.
EN
Dual Port
Remote Unit
# 1 (Standard)
CONNECTIONS
To connect to a cable and to confirm correct connection:
• Use the correct port (VOICE, VIDEO or DATA) according to
the cable connector type. (Use VOICE for RJ11, RJ12, RJ14
or RJ25 cables, VIDEO for F 75 Ω Coax or DATA for RJ45).
• Press the corresponding port button (VOICE, VIDEO or
DATA).
• The display shows the selected port.
• Connect one end of the cable to the selected port on
the tester and the other end to a Remote Unit for cable
identification and testing or to an Identifier for cable
identification only.
• The display shows the type of termination (Remote Unit
or Identifier) and its Number to assist identification when a
number of different terminations are in use.
6
Coax
Remote Unit
# 1 (Standard)
# 1 to 12 (Optional - 158053)
PoE PRO
RJ45
Remote Unit
# 1 to 12 (Optional - 158050)
RJ45
Identifier
# 1 to 24 (Optional - 158051)
Termination
Number
Identifier
Indicator
Remote Unit
Indicator
158823.01