Ideal Networks PoE Pro Guía De Uso página 15

HUB (PORT) BLINK
To assist in confirming correct cabling of Ethernet installations, PoE PRO can generate
Ethernet signalling on one end of a cable which causes the port LED of the device connected
to the other end to flash.
Hub (port) Blink is only available when the DATA port is selected.
Ethernet
Device
Indicator
Port
Segment
158823.01
To switch on Hub Blink:
Press the TOO LS button repeatedly until the Ethernet Device
Indicator flashes.
Press or
• The symbol shows that Hub Blink is switched on.
• The Port Segment of the Ethernet Device Indicator blinks.
• Hub blinking continues until switched off or for a maximum
of 144 minutes.
To switch off Hub Blink:
Press the TOOLS button
• The Ethernet Device Indicator Port Segment stops flashing.
• Hub Blink stops.
PoE PRO
RG59
Cat 3
Cat 5/5e/6/6A
Cat 7
EN
NVP
70
82
65
72
79
15