Installing The Wireless Module - Sirona CEREC AC Instrucciones De Montaje

Sirona Dental Systems GmbH
Installation Instructions for Wireless Module HW8614 Retrofit Kit CEREC AC
62 80 056 D 3492
D 3492.092.04.01.02 08.2009
2.4

Installing the wireless module

Installing the board power supply
1. Plug the connector of the feed cable for the wireless module power supply
into socket X3 or X4.
2. Run the feed cable out of the acquisition unit housing from its interior.
3. Remove both of the screws fastening the DVD drive.
4. Fasten the power supply (A) along with the DVD drive to the acquisition
unit. To do this, use the screws supplied (B).
5. Remove the monitor cable from the supply board on the PC and connect
it to the upper socket of the power supply.
6. Connect the monitor cable supplied (C) to the power supply and to the
supply board of the PC as shown.
2 Installing the wireless module
Installing the wireless module
A
B
C
9