Idiomas disponibles
Idiomas disponibles
5. Fishwire ½" carriage bolts and spacers through the access holes on driver and passenger side
frame rails, pull hardware through existing holes. (2) on passenger side and (1) on driver side.
7. Torque all ½" fasteners to 75ftlb. (102N*M) and the M12 bolt to 68ftlb (92N*M).
Proper torque is needed to keep the hitch secure to the vehicle when towing.
©2016,2017 Cequent™ Performance Products, Inc. - Printed in Mexico
6. Raise passenger side bracket into place over the passenger muffler. Support the
passenger side bracket while loosely installing the M12 bolt & conical tooth washer (teeth
side against hitch) through the bracket and into the frame rail on the driver's side to hold
hitch in place. Then gently pushing the passenger muffler up and outward for clearance,
Install the ½" conical tooth washer (teeth side against hitch) and ½" nuts.
8. Re-install exhaust hangers.
Sheet 7 of 21
36548NP
5-3-17
Rev. F
