Idiomas disponibles
Idiomas disponibles
1. On Chrysler 300/300C Remove plastic appearance panels which cover trunk pan. Return
appearance panels and fasteners to vehicle owner
3. Remove the (1) muffler from the vehicle.
On V8 models - remove and save (2) assembly bolt and spring from the flange (nut and
spring are attached). Carefully remove muffler from driver's side. See figure 3
On V6 models - remove and save band clamp, separate exhaust pipes and remove
muffler. Band clamp located just before "Y" connection on exhaust. Carefully
remove muffler from driver's side. See figure 4
©2016,2017 Cequent™ Performance Products, Inc. - Printed in Mexico
2. Lower exhaust by removing (2 (13mm socket )) exhaust hangers per side. This will allow
access to frame rail by pushing the muffler up and outward for clearance. The removal of
the rubber isolator/s, from hanger/s off exhaust pipe/s forward of the trunk pan, will allow
additional clearance. Spraying a lubricant or soapy water on the metal hanger/s rod and the
rubber isolator helps removal.
4. Run the M12 bolt into the existing weldnut to clean dirt or debris from weldnut:
Sheet 6 of 21
36548NP
5-3-17
Rev. F
