Installation Instructions - HAMPTON BAY 743-253 Manual De Instrucciones

PARTS INCLUDED FOR INSTALLATION (parts are not to scale):
2 ea Bracket
Mounting Screws (#5)
3 ea Wire
Nuts (#13)

INSTALLATION INSTRUCTIONS:

1. Remove the Canopy Mounting Screws (???) from the Mounting Bracket (#4). Keep the
Canopy Mounting Screws. Fig. 2
holes of the Mounting Bracket (#4) as shown. Thread the Hex Nuts (#6) onto the Fixture
Mounting Screws (#7), as shown. Do not tighten the Hex Nuts (#6) at this time.
2. Rotate the Swivel Bar (#9) of the Mounting Bracket (#4) so that it is perpendicular to the
Straight Bar (#7).
3. Pull the power supply wires out from the Outlet Box (#3), and mount the Mounting Bracket
(#4) to the Outlet Box (#3), using the Bracket Mounting Screws (#5).
4. Turn the Swivel Bar (#9) to the desired position, keeping in mind that it will determine the
final orientation of the Fixture itself. Tighten both Center Screws (#17). Fig. 4
5. Attach the Black Supply Wire (#14) to the Black Fixture Wire (#10) and the White Supply
Wire (#15) to the White Fixture Wire (#11) using Wire Nuts (#13). Connect the Fixture
Ground Wire (#12) and the Supply Ground Wire (#16) together using a Wire Nut (#13). Wrap
all wire connections with electrical tape for a more secure connection.
electrical questions, consult your local electrical code for approved grounding methods.
6. Carefully tuck all Wires and Wire Nuts (#13) into the Outlet Box. Place the Canopy (#8) of the
Fixture over the Outlet Box (#3), flush against the ceiling surface, making sure the Canopy
Page 6
Thread the Fixture Mounting Screws (#7) into the provided
1 ea Mounting
Bracket (#4)
1 ea Fixture
Fig. 3
Fig. 5 Note: If you have