Operate The Zeon Discovery Lighting System - Orascoptic Zeon Discovery Manual Del Usuario

4. Operate the Zeon Discovery Lighting System

1. Attach the LED headlight to your loupe (1)
by tightening the jaws of the mounting hinge
to the mounting block on the bridge of your
loupe frame. (You may have to first attach the
mounting block to your loupe frame if it is not
already attached.)
2. Insert the cable grommet through the cable
guide (2) and rotate the grommet so that is locks
in place.
3. Secure the cable to the temple using the
supplied temple clip.
4. Put the loupe/light on and adjust it to a
comfortable working position.
5. Secure the cable with the gown clip (3) so that
the cable does not hinder the view or the work of
the user.
6. Connect the cable to the control unit as
previously described.
7. Press the "On" control button on the unit to turn
on the light.
8. When using the light, or when storing the unit,
never bend the cable tightly to avoid damaging
the cable.
OPERATING INSTRUCTIONS
Discovery™ Portable LED Light System
1
2
3
5