Idiomas disponibles
Idiomas disponibles
7
10
3
12
13
2
9
5
1
6
9
6
A
12
8
C
Scope of supply:
11
1x GPS navigator bracket (1)
1x cap for the GPS navigator bracket (2)
1x GPS navigator mounting plate (3)
4x collar bushings 8.2x14.5x10.5 (4)
4x bushings 8.2x23x12 (5)
1x locking cylinder set (6)
4x bushings 4.2x8x15.25 (7)
4x bushings 13x8.2x4.5 (8)
4x absorbing elements (9)
4x nuts DIN985 M4 (10)
4
8
4x oval head screws M4x30 (11)
4x collar screws M8x50 (12)
8x washers (13)
Assembly
- Insert the absorbing element (9) (included) in the GPS navigator bracket
(1) (included).
- Insert the bushing 8.2x23x12 (5) (included).
5
- Insert the locking cylinder (6) (included) in the GPS navigator bracket (1)
and secure with the clamp (14) (included).
14
- Insert the collar bushings 8.2x14.5x10.5 (4) (included) in the absorbing
4
elements (9) that have already been mounted at the bottom.
- Remove the screws of the fork triple clamp.
NOTE:
Depending on the model, the motorcycle is equipped either with a one-part
clamp (Figure A) or a two-part clamp (Figure B).
B
- Insert the bushings 13x8.2x4.5 (8) (included) into the top of the clamp
(Figure C).
NOTE:
The bushings are not required for the two-part clamp (Figure B).
- Mount the GPS navigator bracket (1) and mount with the collar screws M8x50
(12) (included).
NOTE:
Torque, see Owner's Manual.
76012992070
61134081035
60003098000
0985040003
0035080506
0125050003
5
