Technical Data; Items Supplied; Equipotential Bonding - Cooper Tools Weller WSB 80 Instrucciones Para El Manejo

This small soldering bath was developed for use in industrial manufacturing. The soldering
bath is suitable for connection to all supply units with an 80 W connection. The solder bath
temperature can be controlled continuously from 50°C
is connected. The power supply (24 V safety extra low voltage) is fed over a temperature
resistant silicone cable.

Technical Data

Dimensions (mm):
H = 25; 8 = 20
Soldering Bath (mm):
24V
Supply Voltage:
Power Rating:
Warm Up Time: Approx. 7 min. (50°C-35OOC)
50°C
Temperature Range:
2. Commissioning
Ensure that there are no flammable or temperature sensitive objects near the soldering bath.
Insert the soldering bath plug in the socket on the supply unit and lock by turning clockwise.
Switch on the supply unit. Set the required temperature on the supply unit (50°C
Soldering can be started after the necessary warm up time.
Important: Risk of burns from molten solder. Wear appropriate protective clothing to
protect yourself from burns. Protect your eyes. Wear safety glasses.

3. Equipotential Bonding

The soldering bath is linked to the supply unit over an equipotential bonding wire. Various
methods of realising equipotential bonding are possible.The setting up of equipotential bonding
is described in the operating instructions for the supply unit used.
. > ;
450°C
0
4. Notes
GB
The operating instructions for the supply unit used are also applicable in addition to these
operating instructions. The warning notes contained in the operating instructions for the
supply unit are to be read carefully prior to commissioning.
Repairs are only to be performed by authorised specialist personnel.
Only use those WELLER supply units that are suitable for connecting to the solder bath.
Do not store inflammable objects near the solder bath.

5. Items Supplied

Small Solder Bath
Operating Instructions