Operating Instructions For Misting Mode - Kärcher HD 2.0/1000 Dual Mister Manual Del Usuario

OPERATING INSTRUCTIONS FOR MISTING MODE

STEP 1: Attach ½" hose to a disin-
fectant bucket (Recomendable that
water inlet is at floor level).
We recommend Vital Oxide.
Safety
Latch
High
Pressure Hose
STEP 4: Attach the high pressure
hose to the spray gun.
STEP 7: Close metering valve to
purge hose.
STEP 10: Open metering valve to
use Misting mode.
CAUTION: If valve stays close in
misting mode nozzle may get
damage.
ATTENTION: Si la soupape reste
fermée en mode brumisation, la
buse peut être endommagée.
6
>19"
Pump
Water Inlet
STEP 2: Connect ½" hose to pump
Water inlet. Inspect inlets.
CAUTION: Do not run the pump
without water or pump damage
will result.
ATTENTION: Ne pas faire fonc-
tionner la pompe sans eau pour
éviter d'endommager la pompe.
Spray
Gun
STEP 5: Connect to apropriate
power supply. Push reset button
on GFCI.
STEP 8: Purge any air trapped in
hose (Recommend to do this over
the disinfectant bucket).
STEP 11: Ready to use, mist Vital
Oxide disinfectant.
Manual Dual Mister 9.808-246.0 - E
Pressure
Garden Hose
STEP 3: Connect ¼" high pressure
hose to the discharge nipple. Push
coupler collar forward until secure.
STEP 6: Start up the machine.
STEP 9: Attach misting nozzle into
the spray gun.
IMPORTANT: After finish the job,
flush all chemical remains from
the unit. Fill tank with fresh water
and flush all system.
IMPORTANT: Une fois le travail
terminé, rincer tous les restes
chimiques de l'unité. Remplir le
réservoir d'eau douce et rincer
tout le système.
Discharge
High
Hose
Coupler Collar
Nipple