Idiomas disponibles
Idiomas disponibles
Thank you for choosing this Velbus system relay module. This output relay module will give you great flexibility to turn on or
off appliances or lights. Different operation modes can be selected for each relay contact.
Common used modes are: Turn ON/OFF at each button press; Only turn ON at a button press; Only turn OFF at a button
press...
Most used timed mode will be: Start a timer (e.g. a staircase timer). Combinations are possible e.g. use only one button to
switch on the lights in one place and at same time start a timed action in other place..
How it works:
Each relay contact will have to "learn" the associated push button(s). The learning can be done by setting the relay module in a learning
mode and pressing the desired push button. It is also possible to use the VMB1USB or VMB1RS interface modules to setup your sys-
tem using a PC and the free Velbuslink software.
IMPORTANT: READ THIS MANUAL IN SEQUENCE, DO NOT TRY TO START READING THE LAST PAGE FIRST !
1. Module overview
Connections
1
Normal open relay contacts for outputs 1 to 4
Power supply input 12 to 18Vdc (330mA max)
2
3
Velbus connection
Direct connected push buttons
4
NOTE: These buttons use mode "C" actions (see
next pages)
Removing the front
Indicators and settings
5
Address and learning setup rotary switches
6
Relay activation output indicators
7
Mode setup rotary switch for each channel
8
Timer settings for each channel
9
Local operation and memory clear for each output
10
Power indicator
11
Velbus communication indicators
12
Velbus terminator jumper
13
Operation mode indicators for each relay output
ENGLISH
3
