Operating Anomalies - Transtherm MAS 1T Manual Del Usuario

important
important
ecommendation
important

Operating anomalies

When starting up
The compressor does not work, even though the desired temperature is
lower than the ambient temperature:
Check the wall socket by plugging in any electrical appliance and ensure that
the ON/OFF switch is in position (I).
The compressor does not stop:
1- Put your hand on the condenser (metallic grid located the length of the exte-
rior rear wall of your appliance).
If the condenser is cold, contact your retailer.
2- If the condenser is hot, check the temperature setting controls according to
the model (see previous chapter). If there is no fault in the settings, contact
your retailer.
When functioning
The regulator(s) is / are displaying a temperature / temperatures lower
than the desired temperature(s):
1-Check the temperature setting controls (see pages 9 to 13 of this manual).
2-Check that the hot circuit red indicator light is lit.
The regulator(s) is / are displaying a temperature / temperatures higher
than the desired temperature(s):
1-Check the temperature setting controls (see pages 9 to 13 of this manual).
2-Check that the cold circuit green indicator light is lit.
If the power lead (cable) is damaged, it must be replaced by the manufacturer,
its after-sales service or similarly qualified persons, for safety reasons.
Children must be supervised in order to ensure that they do not play with the
appliance.
In both of the above cases, if (after you have corrected any possible settings
faults and checked that the circuit indicator lights are lit) the fault persists,
contact your retailer.
In all cases, if your appliance does not seem to be functioning correctly, unplug
it and contact your retailer.
THE USE OF GLASS DOORS HAS AN EFFECT ON PERFORMANCE
GB
P 17