JB Systems Plano Spot 7TC Manual De Instrucciones página 8

ENGLISH
 Press the MENU button for about 2 seconds to return to running mode.
Color chase Mode
Used to choose to select one of the preprogrammed colorfades when used in standalone or
master/slave mode. All projectors will always show an identical output.
 Press the MENU button until
 Press the ENTER button to select.
 Use DOWN and UP buttons to select one of the preprogrammed shows
 You will also be asked to select a running speed for the static mode. With the UP/DOWN buttons you can
select (slow) to
 Once the right show is selected, press the ENTER button to confirm.
 Press the MENU button for about 2 seconds to return to running mode.
Slave Mode
By choosing the right slave mode you can improve the impact of the multi-channel shows.
The first slave should be in "SL 2" mode, the second in "SL 3" mode, etc. until "SL16".
 Press the MENU button until
 Press the ENTER button to select.
 Use DOWN and UP button to select one of the available slave modes.
 Once the right mode is selected, press the ENTER button to confirm.
 Press the MENU button for about 2 seconds to return to running mode.
Sound Mode
Used to choose the desired sound mode to trigger the shows.
 Press the MENU button until
 Press the ENTER button to select.
 Use DOWN and UP button to select one of the available modes:

(sound mode ON)  the shows are triggered by the internal microphone.

(sound mode OFF)  the shows are triggered by the speed selected with the shows.
 Once the right mode is selected, press the ENTER button to confirm.
 Press the MENU button for about 2 seconds to return to running mode.
Blackout Mode
Blackout mode: when no DMX-signal is detected, the unit goes in blackout.
No blackout mode: when no DMX-signal is detected, the unit automatically switches to master mode.
ALWAYS set to "No Blackout" when the unit is used in standalone or master (master/slave) mode!!!
 Press the MENU button until
 Press the ENTER button.
 Use DOWN and UP button to select YES (blackout) or no (no blackout) mode.
 Once the mode is selected, press the ENTER button to confirm.
 Press the MENU button for about 2 seconds to return to running mode.
Color Preset Mode
Used to choose one of the 16 standard preset colors. You can also define your own custom color,
based on individual settings for red, green and blue.
 Press the MENU button until
 Press the ENTER button to select.
 Use DOWN and UP button to select one of the available options:
 Select one of the preset colors
 Select
to make your own color and press ENTER to confirm. Now you can set the 3 colors to
make your own custom color:

(red): press ENTER. Then use the DOWN and UP buttons to set the value between 000
and 255. Confirm with the ENTER button. Use the DOWN and UP buttons to select the next color.

(green): press ENTER. Then use the DOWN and UP buttons to set the value between 000
and 255. Confirm with the ENTER button. Use the DOWN and UP buttons to select the next color.
JB SYSTEMS
®
is shown on the display.
(fast).
is shown on the display.
is shown on the display.
is shown on the display.
is shown on the display.
to and press ENTER to confirm.
6/65
OPERATION MANUAL
PLANO SPOT 7TC