Tabla de contenido
Idiomas disponibles
Idiomas disponibles
11. Whisk gear box
12. Whisk attachment
13. Masher attachment
14. Beaker
Manufacturer reserves the right to make any modifications to design, packaging,
or technical specifications of the product without prior notice.
I. BEFORE THE FIRST USE
Carefully remove the unit and its accessories from the packaging. Dispose of all
packaging materials and promotional stickers.
Keep all warning labels and serial number identification label located on the hous-
ing. The absence of the serial number will deprive you of your warranty benefits!
Unwind the power cord. Wipe the housing with a damp cloth. Wash removable
parts with warm soapy water and dry thoroughly before connecting the appliance
to an electrical outlet.
After the appliance transportation or storage at low temperature keep it at
room temperature for at least two hours before plugging in.
II. OPERATING THE HAND BLENDER
General Guidelines
•
Do not fill the food vessel more than 2/3 full to prevent splattering.
•
When using the whisk or the blending attachment first place the attach-
ment into food and then press the Power or Turbo mode button. Always
release the button before removing the hand blender from the vessel.
•
Start operating at low speed and gradually increase it by rotating the
speed control knob on the handle. The control knob has a dial: select
optimal operating speed by rotating the speed control knob.
•
To process at the maximum speed (when blending tough ingredients or
for the final whipping stage) press and hold down the Turbo mode button.
Do not immerse the blender above the joint between the motor unit and the
attachment.
•
Defrost, de-bone, clean, and cut meat into 1-1.5 cm cubes before processing.
•
Remove the pits and cut fruits and berries into pieces before processing.
•
Do not use the hand blender to mash potatoes.
•
Remove the pot from the stove top and let it cool down before process-
ing hot foods. Do not process foods or liquids at a temperature higher
than 80°C. Start processing at low speed to avoid splatter.
Do not use the blender to process coffee beans, ice cubes, sugar, grain, beans,
and other tough foods.
•
Do not use the chopper bowl for blending or whisking. The central pin
at the bottom of the chopper bowl can damage the attachment. Use the
beaker provided with the appliance.
To operate the blender / masher (for RHB-2925-E)
1. Fill the beaker or a similar vessel with food.
2. Press and hold two buttons on the motor unit simultaneously. Connect
the blender/masher attachment to the motor unit and turn in the coun-
terclockwise direction until it clicks into place.
3. Plug in the appliance. Select the required speed setting.
4. Hold the vessel steady and place the blender/masher attachment in the
food. Press and hold down the Power button. When processing raw veg-
etables, fruits, and other hard foods turn the speed control knob to increase
the speed or press and hold down the Turbo mode button.
5. Blend foods using circular up-and-down motion.
6. After the use unplug the appliance. Press and hold two buttons on the
motor unit simultaneously and gently disconnect the attachment.
7. Clean the appliance in accordance with the table A1.
To operate the whisk (for RHB-2925-E)
1. Fill the beaker or a similar vessel with food.
2. Insert the whisk attachment to the gear box until it clicks into place.
3. Press and hold both attachment fixation buttons simultaneously. Connect
the whisk attachment to the motor unit and turn in the counterclockwise
direction until it clicks into place.
4. Plug in the appliance. Turn the speed control knob in the counterclockwise
direction to set 1 (minimum speed).
5. Hold the vessel steady and place the whisk attachment in food. Press and
hold down the Power button. Turn the speed control knob clockwise to
increase the speed if necessary (from 1 to 5). For whisking at a maximum
speed press and hold down the Turbo mode button.
6. Whisk foods using clockwise circular motion.
7. After the use unplug the appliance. Press and hold the attachment fixation
buttons simultaneously and gently disconnect the whisk attachment.
8. Clean the appliance in accordance with the table A1.
To operate the chopper
1. Place the chopper bowl on a flat and stable surface.
RHB-2920-E, RHB-2925-E
GBR
7
Tabla de contenido
