Idiomas disponibles
Idiomas disponibles
Enlaces rápidos
View of one style of the optional Rear
Sport Bumper Trim.
Hitch Shown In Proper Position
Equipment Required:
Fastener Kit: 75614F
Wrenches: 19 mm, 21mm, 10mm
Fits with mini spare tire stowed under vehicle. Will not fit with full size spare.
1
Qty. (8)
Hex Bolt, M14 – 1.50 x 45mm CL10.9
1.
Remove spare tire.
2.
Lower vehicle exhaust by removing the two rearmost rubber hangers – both sides.
3.
Remove heat shields.
4.
Raise hitch into position and install (8) M14 hex bolts and (8) flat washers into existing weldnuts as shown.
5.
Tighten all M14 bolts to proper specification.
6.
Re-install heat shields – tighten bolts. Re-install exhaust.
7.
Re-install spare tire.
Note: check hitch frequently, making sure all fasteners and ball are properly tightened. If hitch is removed, plug all holes in trunk pan or other body panels
to prevent entry of water and exhaust fumes. A hitch or ball which has been damaged should be removed and replaced. Observe safety precautions when
working beneath a vehicle and wear eye protection. Do not cut access or attachment holes with a torch.
This product complies with safety specifications and requirements for connecting devices and towing systems of the state of New York, V.E.S.C.
Regulation V-5 and SAE J684.
©
2007, 2010, 2011, 2013, 2014 Cequent Performance Products, Inc.
Installation Instructions
ACURA MDX
Fits with mini spare tire stowed under vehicle.
Will not fit with full size spare.
Will not fit with Rear Sport Bumper Trim.
Typical center
bumper cover
Existing weldnuts
Both sides
Fascia/Bumper
Heat Shield
Tighten all M14 CL10.9 fasteners with torque wrench to 90 Lb.-Ft. (122 N*M)
Do Not Exceed Lower of Towing Vehicle
Manufacturer's Rating or
Hitch type
Weight Distributing
Weight Carrying
Ball Mount
Wiring Access Location: SUV 1, SUV 2
1
2
2
Qty. (8)
Flat Washer 9/16 (Hardened)
Sheet 1 of 3
Printed in Mexico
Part Numbers:
75614
87474
44594
78217
U-Haul
Max Gross
Max Tongue
Trailer WT (LB)
WT (LB)
5000 (2270 Kg)
500 (227 Kg)
4000 (1816 Kg)
400 (182 Kg)
Accessory Rating
75614N
6-3-14
Form: F205 Rev A 5-6-05
C
Rev. F
Manuales relacionados para Cequent Performance Products 75614
Resumen de contenidos para Cequent Performance Products 75614
- Página 1 This product complies with safety specifications and requirements for connecting devices and towing systems of the state of New York, V.E.S.C. Regulation V-5 and SAE J684. © 2007, 2010, 2011, 2013, 2014 Cequent Performance Products, Inc. Sheet 1 of 3 75614N 6-3-14 Rev.
- Página 2 Ce produit est conforme aux normes V-5 et SAE J684 de la V.E.S.C. (État de New York) concernant les spécifications en matière de sécurité des systèmes d’attelage. © 2007, 2010, 2011, 2013, 2014 Cequent Performance Products, Inc. Feuille 2 de 3 75614N 6-3-14 Rev.
- Página 3 Este producto cumple con las especificaciones y requisitos de seguridad para conectar dispositivos y sistemas de remolque del estado de Nueva York, V.E.S.C. Regulación V-5 y SAE J684 © 2007, 2010, 2011, 2013, 2014 Cequent Performance Products, Inc. Hoja 3 de 3 75614N 6-3-14 Rev.