QUICK HEATING/POWER BOOST
This function further reduces cooking time
in a given area taking the temperature
to the maximum power for a 10 minute
interval. At the end of this interval, the
cooking area power automatically returns
to level 9.
The use of this function is recommended
for heating a large quantity of liquid in a
very short time (i.e. water for cooking
pasta) or other dishes.
To activate this function, select the cooking
area and press the key
Press the
key again.
An acoustic signal will be emitted and a
symbol
will be visualised on the display
E relative to the area.
RESIDUAL HEAT
If the temperature of the cooking area is still
high (over 50°) after it has been switched
off, the relative display will indicate the
symbol (residual heat). The symbol will
only switch off when the burn risk is no
longer present.
POT DETECTION
If the symbol
the cooking area displays, it means that:
1) The recipient being used is not suitable
for induction cooking.
2) The diameter of the recipient used is
inferior to that allowed by the appliance.
3) No recipient is present.
TIMER
This function allows you to set the time
(from
to
switch off of the selected cooking zone.
Select a cooking zone by pressing one of
the F keys and set the power by pressing
the C or D keys.
To activate the timer press again the F key,
an acustic signal will be heard and the ''t''
symbol will appear on the display of the
selected cooking zone.
Set the time by pressing the C or D keys.
If the cooking zone is in the lower part of
the cooktop the time will be shown on the
display of the cooking zone in the upper
part of the cooktop and vice versa. Press
up to level 9.
should appear on one of
minutes) to automatically
the key F again to confirm your selection.
When the timer function elapses, the
cooking zone will automatically switch off
and an acoustic signal will be heard.
To disable the timer function, press the F
key on the cooking zone previously started,
bring the timer value back to
the D key, then press the B key again to
confirm your selection.
CONTROL PANEL LOCK
The
key blocks the hob functioning,
in order to prevent any unintentional
operation (e.g. by children). In this state no
action on the keys has effect. To activate
the safety function, press the
the warning light switches on. The cooking
top can however be switched off even when
the controls block is activated. In this case
the controls block remains active when the
top is switched on again. To deactivate the
safety function press the
warning light switches off.
SWITCHING THE COOKING ZONES
OFF
To switch a cooking zone off, press the
relative
key to select it then press
simultaneously the
the
key until reaching position .
SWITCHING THE HOB OFF
To turn off the cooking top entirely hold
down the
key.
SAFETY SWITCH
The appliance has a safety switch that
automatically switches off the cooking
zones when they have been operating for
a certain amount of time at a given power
level.
POWER
LEVEL
1 - 8
9
16
key until the
and
key, or press
OPERATING TIME
LIMIT (hours)
10
3
by using
key until