Mx Onda MX-CDP2686 Manual De Usuario E Instalacion página 35

During the installation, cleaning or maintenance of the
extractor hood, the electricity supply must be cut off (isolation
switch in the off position or the hood unplugged from the mains
socket).
To avoid injury during installation or cleaning, use extreme
caution and pay attention to the sharp edges inside the cooker
hood (wear gloves).
When the extractor hood and kitchen appliances that run on
gas or other fuel are running simultaneously, the negative
pressure in the kitchen should not exceed 4 Pa (4 x 10-5 Bar).
Do not repair or replace any part of the appliance unless
specifically recommended in the manual. All other services
must be performed by a qualified technician.
Do not use scourers or any other abrasive cleaning product to
clean the cooker hood, and do not use steam cleaners as this
could damage the electrical and electronic parts.
In case of breakdown, abnormality, if the plug, power cord or
other parts show deterioration, do not plug in the appliance
and do not try to repair it yourself. Contact the closest MX
ONDA Official Technical Service.
This appliance is designed for household, non-professional
use only. MX ONDA will not accept any responsibility and the
guarantee will not be valid in case of improper use or non-
compliance with the instructions.
5